Why do steel mills need tear-resistant hang tags for round steel, rebar, aluminum and wire?
With the rapid development of the modern steel industry and its information technology, the requirements for online inspection, product quality tracking and permanent quality traceability of steel products from production to finished product delivery to the market are getting higher and higher. At present, some manufacturers still use manual marking, that is, workers write or spray words on the surface of steel as markings.

At this time, the surface temperature of the billet is still very high and the production rhythm is also very fast. Workers are prone to burns and other operational risks during operation. , It is easy to cause "mixed steel" so that the marking line cannot correspond to the actual billet one by one. At the same time, the paint sprayed on the steel is easily volatilized by high temperature or marked on the iron oxide scale. During storage and transportation, the mark is easily lost or blurred and cannot be identified. Moreover, when the paint is heated, it will volatilize irritating gases and fumes. , Affect the health of operators and further pollute the environment. Therefore, high-performance identification tags are urgently needed.
High-temperature resistant tags that can withstand a temperature range of 400°C to 800°C are provided to meet different needs. At the same time, they are waterproof and weather-resistant, and can be stored outdoors for more than a year without falling off.
Special hangtags for wires: Our company's hangtags are made of special materials, which are resistant to high temperatures, and are also acid-resistant, waterproof, and UV-resistant.
Special labels for H-beams: Our company uses strong adhesives, which can be firmly adhered to the surface of H-beams, and are temperature-resistant and waterproof.
Special labels for medium and thick plates: Our company uses aluminum foil labels with temperature-resistant adhesives, which can be firmly attached to the uneven sides of the plates and can clearly display the barcode, perfectly solving the problem of easy falling off of the side labels. .
End face marking of aluminum bars: Our company's special label material has super low temperature resistance and can also withstand high temperatures of 150°C. It uses special glue to ensure no residue and fully meet customer requirements.
Special labels for hot-rolled coils: Our company's product labels use special heat-resistant materials and special adhesives specifically for steel surfaces, so that the labels can be firmly attached to the surface of hot-rolled coils and clearly display product information.
Special hang tags and labels for steel pipes: The special hang tags and labels provided by our company are temperature-resistant and oil-resistant.
1. High-temperature hang tags for prefabricated materials
By using barcodes to identify semi-finished products, you can optimize quality assurance and material management work. At the end of the cooling bed, the product still maintains a residual temperature of up to 400°C - this places special demands on industrial labels.
2. High-temperature labels for hot-rolled strip
Accurate product barcode identification is required at every stage of the internal material flow and during storage and outbound delivery. For hot-rolled strip, there are high-temperature solutions using barcode identification even at high temperatures.
3. Weather-resistant and tear-resistant high-temperature labels
Matte 3mil PI substrate, double-sided coating, high temperature resistance up to 400°C. The product has good waterproof, oil-proof and tear-resistant functions, and is mainly used for wire rods in the steel industry, such as rebar.
In order to better track product quality and achieve full traceability of products from blanks to the market, product surface identification has become an indispensable and important part of steel production. Many international standards have detailed specifications for the labeling of steel products, and production must be organized in accordance with international standards. Online labeling has become one of the indispensable and important auxiliary equipment for modern steel enterprises.
4. Waterproof and tear-resistant labels
3milPET, PVC or intermediate PET double-sided paper substrate, working temperature below 200°C. The product has good waterproof, oil-proof, acid-proof and tear-resistant functions. Mainly used for wire rods in the steel industry, such as rebar, etc.
5. Steel wire coil high temperature hang tag
Steel wire coils have various requirements for barcode solutions. Depending on the cooling zone, the temperature during the marking process can reach up to 400°C. Post-processing processes (such as etching) require the mark to be chemically resistant.
6. Bar/structural steel high temperature label
Self-adhesive labels provide you with flexible solutions for steel coil identification, single steel identification (including color identification).
7. Tubular high temperature label
Modern logistics solutions based on barcodes require clear and reliable material identification. Only high-quality labeling solutions can provide you with the necessary process security and meet high requirements.
8. S+P Forged High Temperature Hang Tags
By adding barcodes to your containers, you can optimize quality assurance and material management.
9. Flat Steel High Temperature Labels
Packaging and logos are the business cards of your company. You can meet your customers' strict packaging regulations and provide a clean, legible data carrier that is relevant to your goods.
10. Profile High Temperature Labels
Special surface coatings for different printing processes (laser, thermal transfer, dot matrix or solid color wheel) ensure high print quality and readability when processing barcodes.
Application areas:
1. Suitable for marking and labeling of raw material refining and casting.
2. Suitable for steel hanging tags and identification tags for long-term storage in the field.
3. Suitable for marking round steel, rebar, aluminum and wire.
4. Marking of steel wire, steel plate, hot-rolled plate, cold-rolled plate, medium and thick plate, profiles and blanks.
Common specifications and sizes of high-temperature hanging tags in the steel industry:
65 * 105 mm
70 * 110 mm
70 * 115 mm
75 * 120 mm
Processing technology:
The sign is made of special high-temperature resistant and tear-resistant materials, single-sided printing or double-sided printing, or double-sided blank, roll packaging process, punching on each sheet, and punching process between two labels. The surface coating is conducive to thermal transfer.
Use environment:
Use a steel sign printing printer to print quickly and clearly. The printed text is resistant to friction, high temperature, wind, rain and sunlight. The punched holes are very tear-resistant and are particularly suitable for the harsh outdoor environment of the steel industry.
