How to choose self-adhesive materials - there are many varieties of objects with rough surfaces, such as frosted glass, matte plastic bottles, etc. The surface of such objects is not composed of smooth surfaces, but of uniform, uneven, four-convex surfaces.
Because the adhesive contact surface of this kind of surface to the label is small, the bonding strength is poor, and the label is prone to warping and falling off, so it is necessary to choose a special type or structure of the label material to meet the requirements of the rough surface pasting.
In general, the following self-adhesive materials are used as label materials for attaching to objects with rough surfaces.
(1) Materials with a large amount of adhesive coating. The coating amount is generally about 30g/m2. Relying on the large amount of gluing, the adhesive strength of the label and the coarse planting surface is increased.
(2) Label materials coated with a soft adhesive with good fluidity. The adhesive of this material can penetrate into the recesses of the rough surface, thereby increasing the bonding area and the adhesion of the label to the surface of the object.
(3) Use high-strength adhesive-coated label materials, such as hot-melt adhesives and solvent-based adhesives. These materials have a strong initial and final viscosity and are suitable for adhesion to objects with coarse surfaces.
